X
تبلیغات
رایتل
+ سجاد سه‌شنبه 6 مهر 1395 10:10

مقاله جوشکاری با عنوان:

RESISTANCE SPOT WELDING OF MAGNESIUM
ALLOY SHEETS WITH COVER PLATES

S. Satonaka, C. Iwamoto, G.-i. Murakami
and Y. Matsumoto

چکیده مقاله:

Lightweight materials such as high-strength steels and aluminum alloys are widely used in automotive components
for the purposes of weight reduction and consequent higher fuel effi ciency. As new alloys have been
developed, magnesium alloys have become attractive for the production of automotive components due to
their unique properties, such as high specifi c strength, damping capacity, and recyclability. In the assembly
process of these materials, resistance spot welding (RSW) is used to construct thin sheet structures. Although
RSW of steel sheets with high weld quality has already been established, the following problems remain with
regard to RSW of magnesium alloys: high welding current, degeneration of electrodes, and blowholes and
expulsion in or around the nugget. In this study, RSW with cover plates was applied to magnesium alloy sheets
to investigate the performance of spot-welded joints. The weld quality was evaluated based on the tensile
shear strength of the joints, the shape and the size of the nugget, and the appearance of blowholes and
expulsion. Since RSW with cover plates is similar to conductive heat resistance seam welding (CHRSMW),
the results showed that RSW with cover plates enabled the spot welding of a magnesium alloy with a large
nugget and high tensile shear strength in the joint. It was also shown that blowhole-free spot welds with a
large nugget and high tensile shear strength were obtained for welding currents above 8 000 A with a long
down-slope time of welding current and a high electrode force.


خرید و دانلود مقاله جوشکاری RESISTANCE SPOT WELDING OF MAGNESIUM ALLOY SHEETS WITH COVER PLATES